MS9035C
REQUIREMENTS:
1. MATERIAL: HEAT RESISTANCE STEEL IN ACCORDANCE WITH AMS 5732.
2. THREADS: THREADS IN ACCORDANCE WITH MIL-S-7742. INCOMPLETE THREADS NOT TO ENTER FILLET.
3. DIMENSIONING AND TOLERANCING: DIMENSIONING AND TOLERANCING SHALL BE IN ACCORDANCE WITH ASME Y14.5M.
4. SURFACE TEXTURE: SURFACE TEXTURE, UNLESS OTHERWISE SPECIFIED, SHALL BE 125
MICROINCHES EXCEPT UPSET HEAD IN ACCORDANCE WITH ASME B46.1
5. FLUORESCENT PENETRANT INSPECTION: FLUORESCENT PENETRANT INSPECTION SHALL BE IN ACCORDANCE WITH ASTM E1417.
6. TOLERANCE: UNLESS OTHERWISE SPECIFIED, TOLERANCES SHALL BE FOR LINEAR DIMENSIONS +.010, ANGULAR DIMENSION +5°.
7. EDGES: BREAK SHARP EDGES .003-.015 UNLESS OTHERWISE SPECIFIED.
8. PART NUMBER: THE PART NUMBER SHALL CONSIST OF THE BASIC MS NUMBER FOLLOWED BY A DASH NUMBER FROM TABLE I.
EXAMPLE: MS9035- 05
DASH NUMBER
BASIC MS NUMBER
MS9035-05 INDICATES - BOLT, MACHINE, 12 POINT HEAD, HEAT RESISTANT STEEL,.3125-24 NS, LENGTH .562.
NOTES:
1. ALL DIMENSIONS ARE IN INCHES.
2. DO NOT USE UNASSIGNED PART NUMBERS.
3. IN THE EVENT OF A CONFLICT BETWEEN THE TEXT OF THIS STANDARD AND THE REFERENCES CITED HEREIN, THE TEXT OF THIS STANDARD SHALL TAKE PRECEDENCE.
4. THIS STANDARD WAS DEVELOPED COOPERATIVELY WITH THE SAE AEROSPACE PROPULSION DIVISION.
5. AS AND AMS ARE SAE PUBLICATIONS.
6. SUBJECT TERM (KEY WORD) LISTING .
BOLT, MACHINE, 12 POINT HEAD, HEAT RESISTANT STEEL.
2
Source: https://assist.dla.mil -- Downloaded:
Check the source to verify that this is the current version before use.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business