MS9034C
TABLE I. Dash numbers and dimensions
DASH NUMBER |
L |
K +.000 -.060 |
APPROX WEIGHT LBS/100 |
DASH NUMBER |
L |
K +.000 -.060 |
APPROX WEIGHT LBS/100 |
DASH NUMBER |
L |
K +.000 -.060 |
APPROX WEIGHT LBS/100 |
-06 |
.500 |
1/ |
1.29 |
-23 |
1.562 |
.812 |
2.50 |
-41 |
3.625 |
2.875 |
4.85 |
-07 |
.562 |
1/ |
1.36 |
-24 |
1.625 |
.875 |
2.57 |
-42 |
3.750 |
3.000 |
4.99 |
-08 |
.625 |
1/ |
1.44 |
-25 |
1.688 |
.938 |
2.64 |
-43 |
3.875 |
3.125 |
5.13 |
-09 |
.688 |
1/ |
1.51 |
-26 |
1.750 |
1.000 |
2.72 |
-44 |
4.000 |
3.250 |
5.27 |
-10 |
.750 |
1/ |
1.58 |
-27 |
1.875 |
1.125 |
2.86 |
-45 |
4.125 |
3.375 |
5.42 |
-11 |
.812 |
1/ |
1.65 |
-28 |
2.000 |
1.250 |
3.00 |
-46 |
4.250 |
3.500 |
5.56 |
-12 |
.875 |
.125 |
1.72 |
-29 |
2.125 |
1.375 |
3.14 |
-47 |
4.375 |
3.625 |
5.71 |
-13 |
.938 |
.188 |
1.79 |
-30 |
2.250 |
1.500 |
3.29 |
-48 |
4.500 |
3.750 |
5.85 |
-14 |
1.000 |
.250 |
1.86 |
-31 |
2.375 |
1.625 |
3.43 |
-49 |
4.625 |
3.875 |
6.00 |
-15 |
1.062 |
.312 |
1.93 |
-32 |
2.500 |
1.750 |
3.57 |
-50 |
4.750 |
4.000 |
6.14 |
-16 |
1.125 |
.375 |
2.00 |
-33 |
2.625 |
1.875 |
3.71 |
-51 |
4.875 |
4.125 |
6.29 |
-17 |
1.188 |
.438 |
2.08 |
-34 |
2.750 |
2.000 |
3.85 |
-52 |
5.000 |
4.250 |
6.43 |
-18 |
1.250 |
.500 |
2.15 |
-35 |
2.875 |
2.125 |
4.00 |
-53 |
5.125 |
4.375 |
6.56 |
-19 |
1.312 |
.562 |
2.22 |
-36 |
3.000 |
2.250 |
4.14 |
-54 |
5.250 |
4.500 |
6.70 |
-20 |
1.375 |
.625 |
2.29 |
-37 |
3.125 |
2.375 |
4.29 |
-55 |
5.375 |
4.625 |
6.84 |
-21 |
1.438 |
.688 |
2.36 |
-38 |
3.250 |
2.500 |
4.43 |
-56 |
5.500 |
4.750 |
6.99 |
-22 |
1.500 |
.750 |
2.43 |
-39 |
3.375 |
2.625 |
4.58 |
-57 |
5.625 |
4.875 |
7.13 |
-40 |
3.500 |
2.750 |
4.72 |
-58 |
5.750 |
5.000 |
7.28 |
||||
-59 |
5.875 |
5.125 |
7.42 |
||||||||
-60 |
6.000 |
5.250 |
7.57 |
1/ THREAD TO HEAD. MAXIMUM TWO INCOMPLETE THREADS REQUIREMENTS:
1. MATERIAL: HEAT RESISTANT STEEL IN ACCORDANCE WITH SAE-AMS5732.
2. THREADS: THREADS IN ACCORDANCE WITH MIL-S-7742. INCOMPLETE THREADS NOT TO ENTER FILLET.
3. DIMENSIONING AND TOLERANCING: DIMENSIONING AND TOLERANCING SHALL BE IN ACCORDANCE WITH ASME Y14.5M
4. SURFACE TEXTURE: SURFACE TEXTURE, UNLESS OTHERWISE SPECIFIED, SHALL BE 125
MICROINCHES EXCEPT UPSET HEAD IN ACCORDANCE WITH ASME B46.1.
5. FLUORESCENT PENETRANT INSPECTION: FLUORESCENT PENETRANT INSPECTION SHALL BE IN ACCORDANCE WITH ASTM E1417.
6. TOLERANCE: UNLESS OTHERWISE SPECIFIED, TOLERANCES SHALL BE FOR LINEAR DIMENSIONS
+.010, ANGULAR DIMENSIONS +5°.
7. EDGES: BREAK SHARP EDGES .003 - .015 UNLESS OTHERWISE SPECIFIED.
8. PART NUMBER: THE PART NUMBER SHALL CONSIST OF THE BASIC MS NUMBER FOLLOWED BY A DASH NUMBER FROM TABLE I.
EXAMPLE: MS9034 - 06
DASH NUMBER
BASIC MS NUMBER
MS9034-06 INDICATES: BOLT, MACHINE,12 POINT HEAD, HEAT RESISTANT STEEL,
.250-28 NS; LENGTH .500.
Source: https://assist.dla.mil -- Downloaded: Check the source to verify that this2is the current version before use.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business