Requirements: (Continued)
MS51957D
4. MAGNETIC PERMEABILITY: When specified, screws shall have a magnetic permeability of less than 2.0 maximum (air = 1.0) for a field strength H=200 Oersteds using a magnetic permeability indicator per ASTM A 342. Note: Cold working screws may not be capable of meeting permeability and strength requirements simultaneously.
5. THREADS: Screw threads shall be Unified external threads Class 2A UNC in accordance with FED-STD- H28/2. Acceptability of screw threads shall be in accordance with FED-STD-H28/20. Threads shall extend to within two threads or less of the bearing surface of the head, except that all lengths over 2.000 inches shall have a minimum complete thread length of 1.750 inches.
6. RECESS: Recess shall be in accordance with MS9006.
7. MATERIAL IDENTIFICATION MARKING: Type 316 (UNS S31600) or Type 316L (UNS S31603) CRES screws nominal size #10 (.1900) and larger shall be permanently marked "316". Markings shall be raised or depressed on the screw head at manufacturer's option.
8. MATERIAL CODE:
For 300 Series CRES - No code after dash number indicates any 300 Series Austenitic
Corrosion-Resistant Steel listed in material requirement
For Type 316 or Type 316L CRES - "S316" after dash number indicates Austenitic Corrosion- Resistant Steel Type 316 or Type 316L.
9. FINISH CODE:
Passivate - No code letter after dash number, or after material code (if applicable) indicates passivate.
Black Oxide - "B" after dash number, (not available for Type 316 or Type 316L CRES), indicates black oxide coating.
10. PART NUMBER: The part number shall consist of the basic MS number, followed by a dash number from
Table I, a material code (if applicable), and a finish code (if applicable).
Examples:
MS51957-1 indicates Screw, Machine-Pan Head, Cross-Recessed, Optional 300 Series
CRES, Passivated; .0860-56 UNC-2A Nominal Thread Size, .125 Length
MS51957-1B indicates Screw, Machine-Pan Head, Cross-Recessed, Optional 300 Series
CRES, Black Oxide Coated; .0860-56 UNC-2A Nominal Thread Size, .125
Length
MS51957-1S316 indicates Screw, Machine - Pan Head, Cross-Recessed, Type 316 or
Type 316L CRES, Passivated; .0860-56 UNC-2A Nominal Thread Size, .125
Length
NOTES:
1. All dimensions are in inches.
2. Interpret drawing in accordance with ASME Y14.5M.
3. In the event of a conflict between the text of this document and the references cited herein, the text of this document shall take precedence.
4. Unless otherwise specified, issues of referenced documents are those in effect at the time of solicitation.
5. MS51957 Pan Head Machine Screws manufactured prior to 25 April 1997 may be used until stock is depleted.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business