MS16995H
The screws covered by dash numbers given in MS35461 that are replaced by applicable dash numbers in this document are canceled after 5 April 62. Use the dash numbers given in the preceding sheets. The canceled screws cannot always replace the new screws and should be used until existing stocks are depleted. Use only the new screws for design and replacement. Replacement shall be in accordance with this table. Interchangeability information regarding part numbers on superseded drawings are also contained in this table.
TABLE II. INTERCHANGEABILITY TABLE
Part Numbers |
Part Numbers |
Part Numbers |
|||
Canceled |
Superseding |
Canceled |
Superseding |
Canceled |
Superseding |
MS35461 |
MS16995 |
MS35461 |
MS16995 |
MS35461 |
MS16995 |
Dash Number |
Dash Number |
Dash Number |
Dash Numbers |
Dash Number |
Dash Numbers |
1 2 3 4 5 6 11 12 13 14 15 16 21 22 |
25 26 27 28 29 30 35 36 37 38 39 40 47 48 |
23 24 25 26 27 28 29 30 48 49 50 51 52 53 |
49 50 51 52 53 54 55 56 77 78 79 80 81 82 |
54 55 56 57 58 62 63 64 65 66 67 68 69 70 |
83 84 85 86 87 92 93 94 95 96 97 98 99 100 |
Screws covered by the following part numbers are inactive for new design and engineering. They shall be used for maintenance of existing equipment to replace the 5/16 inch size screws used in counterbored holes or other close applications.
Part Numbers |
Inactive |
MS35461 |
Dash Number |
33 34 35 36 37 38 |
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business